Foam concentrates for aviation used by airport fire services, or for use in extinguishing systems e.g. at commercial airports, in hangars or on helidecks, must comply with the requirements of the International Civil Aviation Organization (ICAO). The products Dr. Sthamer foam concentrates that designed for the this aviation sector, i.e. :
is our aqueous film forming foam concentrate, certified in accordance with annexe 14, ICAO level C. Its oustanding fire performance and excellent burn-back resistance exceeds ICAO level C requirements. It is suitable for use at large, category 8, 9 and 10 civil airports with increased risks from large aircrafts, as well as smaller airfields to maximise the use of limited foam stocks. The foam concentrate is admixed at 3% with all standard proportioning equipment or systems, and applied preferably as low expansion foam or non-aspirated foam solution. It is suitable for use in combination with foam compatible dry chemical powder. The aqueous film provides for a high level of burnback safety during rescue operations.
The particular design of STHAMEX®-AFFF ICAO C 3% F-15 allows for low expansion and semi-aspirated foam application using air crash tender mounted monitors or hand held equipment such as hollow stream nozzles or low expansion foam branch pipes.
STHAMEX® -AFFF foam concentrates are physiologically safe and 100% biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.
Products:
Proportioning rate
non-polar liquids: 3%
Expansion
Low-expansion foam: 5 – 10 times
25% / 50% drain time
Low-expansion foam: 2 – 4 minutes / 4 – 8 minutes
Colour: colorless to yellow
pH value at 20°C: 6,5 – 8,5
Density at 20°C: 1,030 ± 0,02 g/ml
Frost-resistant: -15°C
Can used with tap water, seawater, brackish water and treated industrial water.
Shelf life of >10 years
Viscosity:
20 °C < 10 mm2/s
0 °C < 20 mm2/s
-15 °C < 30 mm2/s
Approval:
ICAO – Level C
STHAMEX® -AFFF PREMIUM 3% F-15 (ICAO Level B)
is our cost efficient foam concentrate for airports, certified in accordance with annexe 14, ICAO level B. The aqueous film provides for fast extinction of fuel leakages. It swiftly forms a gastight cover over spilled fuel. The foam concentrate is admixed at 3% with all standard proportioning equipment or systems, and applied preferably as low expansion foam or non-aspirated foam solution. It is suitable for use in combination with foam compatible dry chemical powder.
STHAMEX®-AFFF 3% F-15 PREMIUM is certified in accordance with DIN EN 1568, ICAO, UL/ULC and LASTfire.
Application:
The particular design of STHAMEX®-AFFF PREMIUM 3% F-15 (ICAO Level B) allows for low expansion and semi aspirated foam application using air crash tender mounted monitors or hand held equipment such as hollow stream nozzles or low expansion foam branch pipes.
It is also suitable for protection of aircraft hangars and helidecks or similar when used with sprinkler- and/or deluge systems.
Environmental compatibility:
STHAMEX®-AFFF PREMIUM foam concentrates are physiologically safe and 100% biodegradable when used as intended, with the exception of non-biodegradable C6 fluorinated components. Additional information can be found in the product and safety data sheets.
Products:
Proportioning rate
non-polar liquids: 3%
Expansion
Low-expansion foam: 5 – 10 times
25% / 50% drain time
Low-expansion foam: 2 – 4 minutes / 4 – 8 minutes
Colour: colorless to yellow
pH value at 20°C: 6,5 – 8,5
Density at 20°C: 1,030 ± 0,02 g/ml
Frost-resistant: -15°C
Can used with tap water, seawater, brackish water and treated industrial water.
Shelf life of >10 years
Viscosity:
20 °C < 10 mm2/s
0 °C < 20 mm2/s
-15 °C < 30 mm2/s
Approval:
EN 1568-3, ICAO – Level B, LASTfire, UL 162
is a fluorine-free, 100% bio-degradable, synthetic foam fire extinguishing concentrate, certified in accor dance withannexe 14, ICAO level B. Polymer film forming componentsprovide for high burn-back resistance of the foamat high temperatures. When used on alcohols, these components form a separating layer which provides for alcohol resistance of the foam. MOUSSOL®-FF 3/6 foam is appliedas low-expansion foam with an expansion factor of ≥ 5 or as medium expansion foam. CAFS application produced excellent fire extinguishing times. Where possible, pump supported induction of this pseudo-plastic product should be applied. Due to its complete bio-degradability, MOUSSOL®-FF 3/6 is also used for training and fighting of class A fires.
Application:
MOUSSOL-FF 3/6 F-5 low or medium expansion foam can be used for fighting kerosene fires with an induction rate of 3%. When applied with hollow stream nozzles the foam expansion ratio should be greater 4:1 to ensure a safe and swift fire fighting success. Furthermore, MOUSSOL-FF 3/6 F-5 is suitable for high expansion foam applications in aircraft hangars or similar and inaccessible collecting chambers (e.g. beneath landing platforms). At an induction rate of 6% MOUSSOL-FF 3/6 F-5 is resistant against alcohols and other foam destroying, flammable liquids. For fighting alcohol fires the foam must be applied as low expansion foam. Compressed airfoam system (CAFS) application produces a homogeneous foam blanket of fine bubbles and a very long throwing distance
Environmental compatibility:
MOUSSOL-FF 3/6 F-5 low or medium expansion foam can be used for fighting kerosene fires with an induction rate of 3%. When applied with hollow stream nozzles the foam expansion ratio should be greater 4:1 to ensure a safe and swift fire fighting success. Furthermore, MOUSSOL-FF 3/6 F-5 is suitable for high expansion foam applications in aircraft hangars or similar and inaccessible collecting chambers (e.g. beneath landing platforms). At an induction rate of 6% MOUSSOL-FF 3/6 F-5 is resistant against alcohols and other foam destroying, flammable liquids. For fighting alcohol fires the foam must be applied as low expansion foam. Compressed airfoam system (CAFS) application produces a homogeneous foam blanket of fine bubbles and a very long throwing distance.
Product:
Proportioning rate
solid materials: 0,3%
non-polar liquids: 3%
polar liquids: 6%
Expansion
Low-expansion foam: 5 – 10 times
Medium-expansion foam: 60 – 120 times
High-expansion foam: 400 – 800 times
25% / 50% drain time
Low-expansion foam: 4 – 8 minutes / 8 – 15 minutes
Medium-expansion foam: 2 – 5 minutes / 5 – 10 minutes
High-expansion foam: 2 – 4 minutes / 4 – 6 minutes
Colour: yellow to brown
pH value at 20°C: 6,5 – 8,5
Density at 20°C: 1,040 ± 0,02 g/ml
Frost-resistant: -5°C
Can used with tap water, seawater, brackish water and treated industrial water.
Shelf life of >10 years
Viscosity:
20 °C < 800 (400) mPa*s bei 75 (375) 1/s
0 °C < 1200 (650) mPa*s bei 75 (375) 1/s
-5 °C < 1500 (750) mPa*s bei 75 (375) 1/s
Approval:
EN 1568-1-2-3, ICAO – Level B, DIN EN 3-21A